Samsung Washing Machine Error Codes: How to Fix Them

Written by genjimark87
Samsung Washing Machine Error Code and Solution

Highlights

    Samsung washing machines are built for reliability, but like any appliance, they can sometimes display error codes. These error messages are your washer’s way of telling you something’s not right—whether it’s a water supply issue, a drainage problem, or an unbalanced load.

    Understanding what each error code means and how to fix it can save you time and money. But when DIY troubleshooting doesn’t do the trick, Edmonton Appliance Solution’s professional appliance repair in Edmonton is ready to help.

    🧰 Common Samsung Washing Machine Error Codes & Fixes

    Below is a breakdown of the most frequently seen Samsung washer error codes, what causes them, and how to resolve each issue.

    🚰 Water Fill Issues

    Error Codes: nF, nF1, 4E, 4C, 1 4C, 1E, LE, 1C, LC, LC1, 1 1C, 1 LC
    Problem: Washer not filling or filling incorrectly
    Causes:

    • Water supply taps not fully open
    • Kinked, frozen, or incorrectly connected hoses
    • Clogged inlet filters

      How to Fix:

    1. Fully open the hot and cold water valves.
    2. Check hoses for kinks or freezing, especially in Calgary winters.
    3. Ensure hot/cold hoses are connected to the correct inlets.
    4. Unplug the machine, wait 3 minutes, and restart.
    5. Clean or replace clogged inlet filters.

    ♨️ Switched Hot and Cold Hoses

    Error Codes: nF1, 4C2, 4E2, CE, 14C2
    Problem: Incorrect hot/cold inlet setup
    Fix:
    Make sure the hot water hose is connected to the hot inlet and the cold to the cold. If the error persists, you may have a faulty temperature sensor—call professionals for diagnostics.

    💧 Leaking or Sensor Issues

    Error Codes: 1E, 1 LC, LC, LE, LC1, 1 1C, 1C
    Problem: Leak detection or faulty water level sensor

    Troubleshooting:

    • Check for visible leaks or water around the unit.
    • Inspect hoses for twists or damage.
    • Run an empty cycle. If you see suds, you’ve likely used too much detergent.

    🚿 Drainage Problems

    Error Codes: 5E, nd, 5C, SE, 1 5C, SC
    Problem: Washer won’t drain

    Steps to Fix:

    1. Allow hot water to cool before troubleshooting.
    2. Inspect the drain hose for clogs or kinks.
    3. Check and clean the drain pump filter.
    4. Ensure the washer is properly leveled.
    5. Restart the cycle after checking components.

    Still seeing the error? You may need a new drain pump—Edmonton Appliance Solutions offers same-day Samsung washer repair in Edmonton.

    🚪 Door Not Closing or Locking

    Error Codes: dS, d5, FL, LO, L0, dE, dE1, dE2, dC, dC1, dL, 1 dC, 1dC4, 1dC1
    Issue: Door or lid won’t lock
    Fixes:

    • Check for laundry trapped in the door seal.
    • Ensure the door closes flush—no obstructions.
    • Inspect the door lock mechanism for wear or damage.

    🔄 Unbalanced Load

    Error Codes: dc, Ub, U6, Ur, UE, 1Ub, 1U6
    Problem: Laundry isn’t distributed evenly
    Solution:

    • Pause the cycle and redistribute items.
    • Avoid overloading the drum.
    • If unbalanced errors persist, the vibration sensor might be faulty and require professional service.

    ⚡ Voltage & Power Errors

    Error Codes: 9C1, 9C2, PF, 3E, 2E, 9E1, 9E2, UC, 19C1, 19C2
    Description: Unstable or low voltage supply
    Fix:

    • Check your outlet with another appliance.
    • Reset your breaker or power bar.
    • Inspect the washer’s power cord for wear.

    🧼 Excessive Suds

    Error Codes: SUd, Sd, 5UD, 5d, SUdS, 5Ud5
    Cause: Too much or wrong detergent
    What to Do:

    • Run a rinse cycle to clear suds.
    • Use only HE (high-efficiency) detergent.
    • Measure detergent properly—less is more!

    🔘 Jammed Buttons

    Error Codes: E2, bE2, 6E2, BE2, 8E2
    Issue: Stuck or unresponsive control buttons
    Fix:
    Clean the control panel with a soft cloth. If buttons are still stuck, a control board replacement might be needed.

    🧒 Child Lock or Special Modes

    • CL: Child Lock active – Hold the Child Lock button for 3 seconds to deactivate.
    • Cb / C6: Calibration Mode – Not an error. Let the calibration complete.
    • ddC / dC3: Add Door Error – Ensure the add-door is properly closed.
    • Downloading Message: Your machine is updating. Wait until the update completes.

    🛠️ Need Help? Contact Edmonton Appliance Solutions Today!

    Don’t let Samsung washer error codes disrupt your household routine. When DIY fixes don’t cut it, trust Edmonton Appliance Solutions for fast, professional washer repair services.

    📞 Call Now: (780) 800-3660
    🌐 Book Now
    📍 Serving Edmonton, Calgary, and surrounding towns with pride