Samsung Dryer Not Heating? Here’s What to Do (Easy Guide)

When your Samsung dryer isn’t heating, laundry day can quickly become stressful. Whether you have a new machine or one that’s been running for years, we’ve created this step-by-step, safe guide to help you troubleshoot the issue without relying on guessing.

🔧 Quick Troubleshooting: Why Is My Samsung Dryer Not Heating?

Before diving into complex repairs, run through this quick checklist:

SymptomLikely Cause
Dryer runs, but no heatBurned-out heating element, blown thermal fuse, blocked vent
No heat and cooling light stays onClogged vent or temperature sensor issue
No error code, just not heatingPower supply issue, thermostat, or thermistor fault
Dryer not heating after resetDeeper component issue (fuse, element)

Let’s break each one down with simple solutions.

1. Check the Power Supply First (Yes, Really)

Even if your dryer turns on, it might not be getting enough power to heat up.

For electric models:

  • Make sure the dryer is plugged in securely.
  • Check your circuit breaker box – electric dryers need two breakers. One might trip.
  • Unplug and re-plug your dryer. A simple hard reset can sometimes fix miscommunication between components.

💡 Samsung dryer not heating, reset button? There’s no dedicated reset button, but unplugging the unit for 5–10 minutes achieves the same effect.

🔥 2. Inspect the Heating Element

The purpose of the dryer heating element is to generate warm air inside the drum. Over time, it can wear out or burn due to lint buildup or blocked vents.

How to check it:

  1. Unplug your dryer or turn off the breaker.
  2. Access the back panel and locate the heating element.
  3. Use a multimeter to test for continuity.
  4. If there’s no continuity, the element is faulty and needs replacing.

📍Tip: If your Samsung dryer is not heating but runs, this is one of the most common culprits and a common reason people seek Samsung dryer repair.

🚨 3. Test the Thermal Fuse (Safety First!)

The Samsung dryer thermal fuse is a safety feature that cuts power to the heating system if the unit overheats. If it blows, the dryer won’t heat, even though it may still run.

How to test it:

  1. Disconnect power.
  2. Locate the fuse (check near the blower housing or exhaust duct).
  3. Continuity test: Use a multimeter.
  4. Replace if the fuse is blown—and be sure to find out why it blew.

🔄 A blown fuse often signals a bigger issue, like poor airflow due to lint buildup.

🌡️ 4. Check the Thermostat and Thermistor

Both components help regulate temperature. If either fails, your dryer may under heat, overheat, or not heat at all.

  • Thermostat: Usually located near the heating element.
  • Thermistor: Senses the internal temperature and sends signals to the control board.

What to do:

  • Use a multimeter to check each component for continuity.
  • Replace any that fail the test.

🌬️ 5. Clean the Venting System Thoroughly

Even a partial clog in your dryer vent can cause heating problems and even trigger the cooling light to stay on.

Clean in three steps:

  1. Empty the lint filter.
  2. Detach the vent hose at the back and vacuum it.
  3. Check the outdoor exhaust vent for bird nests, leaves, or debris.

🧼 Pro tip: Clean the dryer vent every 6–12 months to prevent this from recurring.

If you’re unsure, consider reaching out to a trusted appliance repair Edmonton technician for assistance.

🆕 6. Is Your New Samsung Dryer Not Heating?

If you’ve just installed a new Samsung dryer and it’s not heating:

  • Double-check that the power cord is connected correctly, especially for 240V electric dryers.
  • Make sure Eco Dry mode is off (it reduces heat to save energy).
  • Run a test with Time Dry and see if any heat is produced.

What If There’s Still No Error Code?

If your Samsung dryer is not heating and shows no error code, it usually means the control board hasn’t detected a fault it can display. This could point to:

  • A failed component (heating element, thermistor)
  • Power delivery issue
  • Clogged venting system

In this case, you may need to test components one by one or contact a technician for Samsung dryer repair in Edmonton.

 

🧰 DIY vs. Calling a Pro: When to Get Help

DIY-Safe FixesCall a Pro
Setting powerReplacing the control board
Cleaning ventsDiagnosing gas dryer faults
Testing with a multimeterIf unsure about wiring or component access
Replacing the heating elementA dryer is still under warranty

Final Tips to Prevent Future Heating Issues

  • Clean the lint trap after every load.
  • Inspect vents regularly.
  • Avoid overloading the dryer.
  • Run a vent cleaning cycle (if available on your model).

🔁 Recap: Common Causes & Fixes

ProblemFix
Dryer runs, but no heatReplace the heating element or fuse
New Samsung dryer not heatingCheck the power connection and settings
The cooling light stays onClean the entire vent system
No error code, not heatingInspect the thermostat, thermistor, and fuses
After reset, still no heatCheck components with multimeter

Still stuck? It’s always smart to Book a certified technician for Samsung appliance repair in Edmonton for a safe and accurate diagnosis.

Service We Offer Repair & Installation
Scroll to Top